ProCurve 2610 Manual page 158

Configuring RADIUS Server Support for Switch Services
Configuring the RADIUS Server for CoS Services
ProCurve(config)# show port-access authenticator
Port Access Authenticator Status
Port-access authenticator activated [No] : Yes
Current
Port Status VLAN ID
---- ------ -------- ----------- -----------
B7 Open 1
B8 Closed 1
B9 Open 1
B10 Closed 1
Figure 6-1. Example of Displaying Inbound CoS Settings Imposed by a RADIUS Session
6-4
Syntax: show port-access authenticator [ port-list ]
show qos port-priority
These commands display the CoS settings specified by the
RADIUS server used to grant authentication for a given client
on a given port. When the authenticated client session closes,
the switch resets these fields to the values to which they are
configured in the switch's running-config file.
show port-access authenticator [ port-list ] displays, for 802.1X
authentication, the status of RADIUS-imposed overrides of
the switch's per-port CoS configuration.
show qos port-priority displays, for all port-access authentica­
tion methods (802.1X, Web-Auth, and MAC-Auth), the status
of RADIUS-imposed overrides of the switch's per-port CoS
(802.1p) priority for inbound packets.
Current
Port COS
No-override No
No-override No
7
No-override No
RADIUS ACL
Applied?
Yes
Open indicates that there is an
authenticated client session running
on port B7. No-override indicates that
there are no RADIUS-imposed
settings for CoS (802.1p priority) on
port B7.
Open indicates that there is an
authenticated client session running
on port B9. The numeric value 7 is the
most recent RADIUS-imposed setting
for the CoS (802.1p priority) on port B9.