ProCurve 2610 Manual page 162

Configuring RADIUS Server Support for Switch Services
Configuring and Using RADIUS-Assigned Access Control Lists
6-8
Outbound Traffic: For defining the points where the switch applies an ACL
to filter traffic, outbound traffic is routed traffic leaving the switch
through a VLAN interface (or a subnet in a multinetted VLAN). "Outbound
traffic" can also apply to switched traffic leaving the switch on a VLAN
interface.
Permit: An ACE configured with this action allows the switch to forward an
inbound packet for which there is a match within an applicable ACL.
Permit Any Any: An abbreviated form of permit in ip from any to any, which
permits any inbound IP traffic from any source to any destination.
RADIUS-Based ACL: See "Dynamic Port ACL".
Static Port ACL: An ACL statically configured on a specific port, group of
ports, or trunk. A static port ACL filters all incoming traffic on the port,
regardless of whether it is switched or routed.
VSA (Vendor-Specific-Attribute): A value used in a RADIUS-based config­
uration to uniquely identify a networking feature that can be applied to a
port on a given vendor's switch during an authenticated client session.
Wildcard: The part of a mask that indicates the bits in a packet's IP addressing
that do not need to match the corresponding bits specified in an ACL. See
also ACL Mask on page 6-7.