5.4 Footplate adjustments
Footplate angle adjustment
Fold the footplate upward for easy access to the angle adjustment bolt, see
picture 7;
Turn the jam nut counter clockwise with a 17mm wrench to loosen;
Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
counter-clockwise to increase the footplate angle. Turn the adjustment bolt
clockwise to decrease the footplate angle;
When the desired footplate angle is reached, retighten the jam nut.
Angle adjustable bolt
(8mm Allen)
Footplate height adjustment
Remove the front body shroud by lifting it up and off of the power chair base;
Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in
picture 8;
Slide the footplate to the desired height;
Align the bolt holes in the footplate and the footplate bracket;
Install and tighten the bolts.
Height Adjust Bolts
(4mm Allen)
5.5 Joystick adjustments
Jam nut
(17mm)
Picture 7
Picture 8
19
Lock Nuts
(10mm)