Charging The Batteries - 2GOability Quest User Manual

Charging the batteries

Your power chair charging system is designed for your safety and for your

convenience;
Turn off the power on the joystick;

Insert the matching charger plug into the joystick's charging socket that is

located at the front of the joystick or alternatively into the battery pack, see
picture 16 and 17;
Insert the plug at the other end of the charger power cord into a standard

electrical wall outlet (power to the charger indicated by a red LED);
Disconnect the charger power cord from the wall outlet and from the joystick

charging socket when the batteries are fully charged.
Picture 16
 Tip
The batteries should be fully charged in eight hours. A full charge is indicated
when the charge LED turns green and all 10 joystick LEDs are lit when the
joystick is turned on.
Alternatively you may charge the battery pack directly
Remove the battery pack from the power chair;

Locate the charger port on the side of the battery pack and swing the cover

open;
Plug the charger into the battery pack socket;

Insert the plug at the other end of the charger power cord into a standard

electrical wall outlet;
Disconnect the charger power cord from the wall outlet and from the battery

pack charging socket when the batteries are fully charged.
*Alternate Charging Method
Standard Wall Outlet
Picture 17
27