Seat Adjustments - 2GOability Quest User Manual

5.3 Seat adjustments

 Warning:
Be sure the seat is correctly installed and locked before operating your power
chair.
Seat rotation lever
Push down the seat rotation lever and rotate the seat to the desired position;

Release the handle to lock the seat.

Seat height adjustment
The seat is a centre post design that is easy to adjust for height, see picture 6.
Remove the seat;

Place a 17mm wrench on the lock nut and insert an 8mm Allen wrench into the

bolt;
Loosen and remove the bolt, washer and lock nut, noting their placement;

Set the seat post to one of the two adjustment positions;

Reinsert the bolt, washer and lock nut in the same order you remove them and

tighten securely;
The seat stop must be positioned on the left side of the seat post. Remove the

two screws, two lock nuts and reposition the seat stop to the left side of the seat
post;
Reinsert the two screws, two lock nuts, and tighten securely.

Bolt
Picture 6
Seat stop
Washer
Lock nut
18
Quest