Instructions For Use; Joystick - 2GOability Quest User Manual

4

INSTRUCTIONS FOR USE

 Tip
Before turning on the power of your power chair, take note of your environment
and set your speed control accordingly. For indoor driving, we recommend that
you select the lowest speed setting. For outdoor driving, we recommend that
you select a speed setting at which you feel comfortable, safe and in control of
your power chair.

4.1 Joystick

Battery Charge LED Array
/ Joystick display
Speed Setting LED Array
Speed Setting SLOWER
Joystick
On / off button
Push the on / off button to turn on the power of your power chair, see picture 1. The
10 LEDs will flash once and a number of LEDs will remain depending on the state of
the battery charge. Pressing the on / off button again will turn off the power of your
power chair, the LEDs will not lit.
The speed control buttons
These buttons provide you with a way to control the maximum speed of your power
chair. Push the Slower button repeatedly to set your chair's speed to the slowest
setting. This is indicated by one lit LED section on the speed indicator scale. Push the
Faster button repeatedly to set your chair's speed to its highest setting. This is
indicated by five LED sections on the speed indicator scale.
Picture 1
8
Quest
On/Off Button
Horn Button
Speed Setting FASTER