Dis)Assembly - 2GOability Quest User Manual

5.6 (Dis)assembly

 Warning:
Be sure the joystick cable is securely attached to the unit and that the cable is

not able to trail on the ground or become entangled on any surrounding objects
while the unit is in use;
The battery pack weighs 11 kg. The seat with armrests weighs 10 kg. Removal

of armrests will reduce the weight of the seat. Please ask for help if you do not
feel capable of safely lifting that much weight;
Make certain that the controller power is turned off and that the chair is not in

freewheel mode before attempting to perform (dis)assembly;
Before operating of assembling your power chair, be sure to remove the battery

deactivate strip and connect the joystick cable the VR2 controller. Your power
chair will not power up or operate without completing these steps:
Battery pack
Remove the battery pack by pulling up on the handle and remove the battery

deactivate strip, see picture 11;
Connect the joystick control to the VR2 power module, see picture 12;

For disassembly, reverse the assembly process.

Picture 11
Battery replacement
If your batteries need replacement, contact your 2GOability dealer.
Picture 12
21