2GOability Quest User Manual page 24

Arm installation
Loosen the armrest width adjustment screw from the armrest receiver tube at the

bottom rear of the seat frame, see picture 14;
Insert the armrest into the arm receiver tube, so that the armrest pad faces

forward the front of the unit;
Adjust the width of the armrest;

Tighten the armrest width adjustment screw to secure the armrest in place;

For disassembly, reverse the assembly process.

Seat belt installation (optional)
Remove the armrest width adjustment screw from the armrest receiver tube at

the bottom rear of the seat frame, see picture 14;
Insert one of the screws provided with the seat belt through one of the seat belt

anchors, reinsert the screw into the receiver tube, and retighten to secure;
Repeat step one and two for the opposite side of the seat belt;

For disassembly, reverse the assembly process.

Picture 14
23