2GOability Quest User Manual page 29

Quest
Thermal rollback
Your power chair is equipped with a safety system. A microprocessor monitors the
operating temperatures of the controller. In the event of excessive heat occurring in
the controller, the controller will decrease the speed of your chair. This is done to
reduce the load on the electrical system and allow the components to dissipate heat.
The controller will automatically set the chair's speed back to full normal when the
operating temperature returns to normal levels.
Main circuit breaker
The main circuit breaker is another safety feature incorporated into your power chair.
This device monitors the amount of current being drawn from the batteries when the
chair is in use. When the motors are heavily strained and too high a current draw is
being placed on the batteries, the main circuit breaker will trip and bring your chair to
a stop. The main circuit breaker is located under the battery box handle.
Reset button
If the main circuit breaker trips, please wait for approximately one minute and then
push the reset button to reset the main circuit breaker, see picture 18.
Picture 18
 Warning:
Do not attempt electrical repairs. Consult your authorized 2GOability dealer.
28