2GOability Quest User Manual page 21

Joystick bracket length adjustment
Loosen the adjustment knob, see picture 9;

Slide the joystick holder in or out to the desired position;

Tighten the adjustment knob.

Joystick position
Loosen the joystick adjustment screw, see picture 10;

Slide the joystick mount forward and remove the joystick;

Reposition the joystick and joystick cable to the opposite side of the power chair;

Flip up the armrest;

Remove the two bolts connecting the joystick bracket to the armrest, see picture

10;
Place the joystick bracket on the opposite armrest, align the two bolts with the

two holes in the armrest, and tighten to secure the bracket to the armrest,
Insert the joystick mount into the joystick bracket and adjust to a comfortable

position, tighten the joystick adjustment screw to secure the joystick.
Joystick
Adjustment
Knob
Picture 9
Picture 10
20
Quest
Joystick Bracket Bolts (2)
(5mm Allen)