Care And Maintainance - 2GOability Quest User Manual

 Warning:
If your power chair and its components are not properly and securely stowed

during transportation, the power chair or the components may move or become
airborne and cause injury or damage;
Never sit on your power chair when it is being transported;

Always fasten down your power chair securely with an approved tie-down

system while transporting your power chair.
7

CARE AND MAINTAINANCE

Routine maintenance
The 2GOability Quest power chair is virtually maintenance free. All off the bearings
on your power chair are permanently lubricated and sealed. No additional lubrication is
required. There are, however, several things that you can do to help keep up the
appearance and maintain the performance of your power chair.
Cleaning your power chair
 Warning:
Water in any form, will cause electronic malfunction or corrosion of the electrical

components, connections, and the chair frame;
At extremely low temperatures, the batteries of your power chair may freeze,

preventing your power chair form operating;
At extremely high temperatures, your power chair may operate at slower speeds

due to the controllers thermal rollback feature that is designed to prevent
damage to the motors and to the other electrical components of the chair.
Tires
Clean the tires with ordinary kitchen-type cleaners and a damp cloth. Do not use
solvents on the tires. Solvents can cause the tire material to break down or become
too soft.
Body
Clean the body of your power chair with a damp cloth. Do not hose down your

power chair! Dry with a clean soft cloth;
Use cool water mixed with a mild soap to remove dirt and oils;

Clean by hand with a soft cloth.

25