Armrest Adjustments - 2GOability Quest User Manual

5.2 Armrest adjustments

Armrest width adjustment
To adjust the armrest width:
Loosen the adjustment knobs at the rear of the seat see picture 4;

Slide the armrests in or out to the desired width;

Tighten the adjustment knobs.

Armrest angle
Lift the armrest up, see picture 5;

Turn the jam nut counter clockwise to loosen;

Turn the adjustment bolt using a 5mm Allen wrench to raise or lower the armrest

angle. Turning the bolt counter-clockwise will raise the angle. Turning the bolt
clockwise will lower the angle. Turn until the desired angle is reached;
Retighten the jam nut by turning it clockwise.

Adjustment Bolt
Picture 4
(5mm Allen)
Jam Nut
(14mm)
Picture 5
17