Appendix B How To Connect The Dvr Controller (Tbt) - Eclipse Security Nubix User Manual

Appendix B
<Controller>
<1:1 D-Sub Cable>
1. Connect the controller and junction box using 8P Cable.
2. Connect the 12V adapter to the junction box.
3. Connect the DVR and the junction box using the 1:1 RS232 Cable (not twisted
cable).
1. Choose the 'TBT' on the DVR controller menu under the 'System' setup.
2. Select the same baudrate with DVR Controller.
3. Set the wanted DVR ID.
4. Save the setup pressing the 'OK'.
5. You can control the DVR using the TBT controller.
How to connect the DVR Controller (TBT)
<Junction Box>
<12V DC Adapter>
.
94
<8P RJ45 Modular Cable>
<DVR Rear RS232Port>