Eclipse Security Nubix User Manual page 57

6) Key Buzzer
Turn it on/off the buzzer sound when press the button.
7) Auto Lock
Lock Time allows you to set system lock setting that makes system to go into lock
mode for certain period of time. You can select within 1~10 min. When Lock Time is
Off, you have to have Admin authority to change this setting.
8) DVR ID, Remote Control ID
This sets the ID of remote control. If you have many DVRs in the same place, you
can control separately the DVR by different remote control ID.
Use the ID setup and number key to set the ID of remote control on the remote
controller. You may check the ID by pressing the remote control key. The ID should
be the same between the DVR and remote control.
9) Admin Password
This sets Admin Password.
Move cursor over Admin Password Setting, then press 'Enter' button. If you input
correctly Old Password/New Password/Confirm, the password will be changed.
10) User Password
This sets User Password. The procedure is the same as Admin Password setting.
* If you log on with User password, you can only play the recorded files.
11) Power Off
Power off the system. This menu will make the DVR go to the standby mode. If you
want to completely turn it off, use the main power switch on the rear panel.
12) Version
The firmware version is displayed in here.
13) Configuration
You can save the DVR setting to the USB thumb drive.
Export : To save the current DVR setting to the USB thumb drive
Import : To load the saved DVR setting from the USB thumb drive
14) DVR Controller
You can use the DVR controller. Please refer to Appendix B.
56
CH 3 How to Use