3) Sensor type: to set type (N/O, N/C) for each Sensor.
The type of sensor should be set the same as with DVR. Otherwise, DVR may keep
recording on while sensor is not activated.
4) Event Input: You can choose event input for each channel.
① Sensor & Motion Detection
(blank) : No use the event.
S : Sensor input.
M : Motion detection.
V : Sensor or motion detection.
P : Sensor or motion detection with popup.
②Text in
(blank) : No use text in.
V : Enabling the Text in.
P : Enabling the text in with popup.
5) Summary regarding as Event Recording
MD recording
Sensor detection
and recording
MD,Sensor
detection and
Recording
MD,Sensor
Detection and non-
recording
*In REC Menu, MD recording, Sensor detection recording, MD, Sensor detection
recording and no recording are determined according to Event Input.
*Although you set Motion Detection and Sensor Setting to On in Event menu, if
Event Input in Rec Menu is set to None, it only detects and does not record.
Event Input
MD
Sensor
MD/Sensor
None
49
Motion
Detection
ON
OFF
ON
ON
CH 3 How to Use
Sensor Setting
OFF
ON
ON
ON