Eclipse Security Nubix User Manual page 14

[Rear Panel]
3. SENSOR, ALARM
6. RS 485
7. RS 232
8. NTSC/PAL switch
9. LAN
10. Power adapter
1. VIDEO IN : This receives images from cameras and sends them to monitors.
LOOP : This sends the images from the cameras to the other devices.
2. POWER : This turn it on and off the main power.
3. SENSOR IN : This terminal connects external sensor to the product.
ALARM OUT : This terminal blocks connect external electric devices to the
product ( Warning Lamp and others). The first 8 terminals are related with dry
contacts (4 relays).
4. VIDEO OUT : There are four kinds of video out such as composite, spot, S-
VIDEO, and analog RGB(VGA).
5. AUDIO IN : RCA audio in terminals.
You can record four channels at the same time.
AUDIO OUT : RCA audio out terminal.
6. RS485 port : For control the pan and tile cameras. Make sure that the polarity.
7. SERIAL : This is Serial communication(RS232C) cable connection terminal.
8. NTSC/PAL select switch : Choose the proper position along your video format.
9. LAN Port: This is LAN cable connection terminal.
10. DC Power : DC12V 8A.
※ For more details, refer to [CH 2. Installation Method and Cautions].
1. VIDEO IN, LOOP
4. Video out 5. Audio In/Out
13
CH 1 Product Introduction
2. Power switch