Eclipse Security Nubix User Manual page 49

① Channel: Select a channel you want to set for motion detection record.
② Sensitivity.: Users can set this as default value for detection motion and
input range is within 1~10. Using #2 button to change the
sensitivity. 1 is the lowest sensitive value and 10 is the most
sensitive value.
③ Sel/Unsel : Move the cursor to wanted area press '#3' button to select
the start area. Use the arrow key to enlarge the area.
④ On/Off : This will activate or deactivate the motion detection of the
selected area.
⑤ All On/Off : This will activate or deactivate the motion detection of the
whole area.
2) Text Insert
In case of using the POS or ATM, you should choose the right device. Using the
arrow key, go to the 'Text Insert' button and press the 'Enter'. You can see the
device choosing menu.
Go to the wanted channel , use the left and right arrow key to select the device. If you
cannot find your device, please contact our technical support. The advanced setup of
the device will be performed by client software.
48
CH 3 How to Use