Eclipse Security Nubix User Manual page 32

3) Selecting channel: #1 button is used to change the current channel.
4) Focus In/Out : This controls focus of camera.
Use #2 button (Focus In) and #3(Focus Out).
5) Zoom In/Out : You can enlarge(#4 button) or reduce (#5 button).
6) Iris In/Out : Control brightness of camera.
Use #6 button (Iris In) and #7 button (Iris Out).
7) Patrol : This feature allows you to operate camera automatically in order that
you have set camera motion. Patrol allows you to set all directions like
Up/Down/Left/Right.
- Start(#8 button) : Operates Patrol feature.
- Learn(#0 button) : Move direction of camera as you wish with
- Stop(#9 button) : Remember areas moved with Learn button.
If you press Patrol Start button, it is automatically operated according to path
setting.
8) Auto PAN : Allow you to move cameras by setting left and right two points.
- On('REW')/Off('PLAY') : Select operation status of AutoPAN feature.
- P1('FF') : Press P1 button after moving camera direction to first point.
- P2('SLOW') : Press P2 button after moving camera direction to two points.
If you press On ('REW') button, it moves while repeating P1 and P2 automatically,
and you can stop operation by pressing Off ('PLAY') button.
* For connection of PAN/TILT Camera Receiver part, refer to user's manual of the
related PAN/TILT Camera.
using direction buttons after pressing this button.
31
CH 3 How to Use