Table of Contents
Advertisement
PREPARATIONS FOR OPERATION
Setting and Displaying the Date
and Time (Cont'd)
Setting the Date and Time
1.
Display the CLOCK ADJUST menu screen.
Select the CLOCK ADJUST item on the TIME/DATE
menu screen.
TIME/DATE menu screen
2.
Set the date and time.
The blinking digit is the one to be set.
CLOCK ADJUST menu screen
Date
Time (Hour:Min)
1When the SHUTTER dial is pressed, the blinking digit
moves to the next digit.
2When the SHUTTER dial is rotated, the value of the
blinking digit changes.
When the SHUTTER dial is rotated upward, the value
becomes higher. When rotated downward, the value
becomes smaller.
3Repeat the procedure described in 1 and 2 above to
set the day, month, year, hours, minutes.
The digits indicating seconds cannot be set.
4Press the SHUTTER dial in sync with a time signal to
enter the date and time precisely.
3.
When all the settings are completed, rotate the SHUT-
TER dial to align the cursor with the PAGE BACK item,
and then press the SHUTTER dial.
• The TIME/DATE menu screen returns.
4.
To return to the normal screen, use either of the following
methods.
Press the STATUS button
or
Return to the TOP MENU screen and then select the
EXIT item on the TOP MENU screen before pressing the
SHUTTER dial.
42
Displaying the Time and Date on the
Screen
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
Date
Time
1.
Display the TIME/DATE menu screen.
1Select the TC/UB/CLOCK item on the TOP MENU
screen.
2Select the TIME/DATE item on the TC/UB/CLOCK
menu screen.
2.
Set the TIME/DATE menu screen.
• DISPLAY item
: Sets whether or not date and time
should be displayed.
Set to ON to display the indications.
• DISPLAY MODE
: Sets the video output mode in
item
which date and time should be dis-
played.
BARS
: Displayed when outputting the color
bar.
CAM
: Displayed when outputting the color
camera image.
BARS+CAM
: Date and time are always displayed.
• DISPLAY
: Sets the style in which the date and
STYLE item
time are displayed.
DATE+TIME
: Date and time are displayed.
DATE
: Date only is displayed.
TIME
: Time only is displayed.
Display of date and time in the various operation modes.
In Camera mode
: The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
In VTR stop mode
: The last read date and time values
are displayed.
When an HDV/DV sig-
: The date and time of the DV input
nal is input from the
are displayed in DV format. The
IEEE1394 connector
date and time of the internal clock
are displayed in HDV format.
Displaying Time Code
The
GY-HD250/GY-HD251
records
SMPTE-standard
(NTSC) or EBU-standard (PAL) time codes and user's bits.
In the play mode or the record mode, the reproduced time
codes or user's bits are shown on the LCD monitor or in the
viewfinder.
• Time code generator data is output from the [TC OUT] ter-
minal or [HD/SD-SDI] terminal.
The time codes or user's bits can be shown on the LCD mon-
itor or in the viewfinder during playback and recording as fol-
lows. (Status screen)
Setting
1.
Set the TC/UB item on the LCD/VF[3/4] menu screen to
ON.
• Time codes or user's bit data are displayed on the
STATUS screen.
Time code indication
(Example)
Time code indication
00:00:00:00
User's bits indication
FF EE DD 20
STATUS 1 screen
2.
Whether time codes or user's bit data should be dis-
played is selected with the TC DISPLAY switch inside the
LCD door.
TC
: Time codes are displayed.
UB
: User's bit data is displayed.
LCD BRIGHT
CAM/VTR
-
+
AUDIO SELECT
TC
CH-1
CH-2
DISPLAY
GENE.
TC
FREE
AUTO
UB
REC
MANU
REGEN
TC DISPLAY switch TC GENE. switch
Displayed Time Code/User's Bit
• When TCG SOURCE on the TC/UB/CLOCK menu screen
is set to INTERNAL, values from the built-in time code
generator is displayed.
• When TCG SOURCE on the TC/UB/CLOCK menu screen
is set to EXTERNAL, values from the external time code
generator connected to the [TC IN] terminal is displayed.
• When TC DUPLI. on the TC/UB/CLOCK menu screen is
set to ON in IEEE1394 input mode, values input in the
[IEEE1394] terminal is displayed.
• Values recorded on the tape are displayed for PLAY
mode.
Time code input entered the
IEEE1394 connector
Pressing the STOP button for 1 second in the EJECT or stop
mode displays the DV input time code data or user's bit data
from the IEEE1394 connector on the STATUS screen.
DTCG : The time code data from the IEEE1394 connector
DUBG : The user's bit data from the IEEE1394 connector
To return to display of the original time code or user's bit,
press the STOP button. (Display of the normal time code or
user's bit is also restored by performing VTR operation.)
MEMO
• To use input time code data from the IEEE1394 terminal,
set TCG SOURCE item on the TC/UB/CLOCK menu
screen to INTERNAL.
• To record HDV/DV input time code and user's bit from
the IEEE1394 connector, set the TC DUPLI. item on the
TC/UB/CLOCK menu screen to ON.
X See page 93.
• To maintain the continuity of time code data, use with the
TC GENE. switch set to REGEN mode when recording
HDV/DV input signal from the IEEE1394 connector.
• There is no time code display for HDV input.
CAUTION
A time code with a duration of more than 2 hours may not
be displayed correctly by DV components for general con-
sumer use, as some of these lack the capability to display
longer time codes.
43
Advertisement
Table of Contents
