McQuay MDS030AR Applications Manual page 76

Design & installation Guide For McQuay MDS Multi System
-76-
Installation of MCM-T Series Indoor Unit
To Check the Accessories are Ready
To install the indoor unit
There are two types of installation. Make sure the hook can bear the unit weight in ceiling
mounting; a slope for the drainage direction is a must both for ceiling/floor standing mounting;
ensure there is enough space for maintenance around the unit.
There are two type of installation: vertical floor standing or horizontal ceiling mounting:
ceiling mounting
400mm
PULL
If the indoor unit is semi-concealed mounted in ceiling, reserve holes in ceiling to ensure
enough space for mounting and maintenance, as shown below:
Horizontal ceiling mounted
1. To remove the return air grill, frame, side panel and suspending panel as shown as below:
300mm
ceiling mounting
PULL PULL PULL
floor standing mounting
ceiling
side panel
suspending panel
frame
return air grill
floor standing mounting
250mm
1000mm
10mm
machine top panel
10mm