McQuay MDS030AR Applications Manual page 33

Loop monitoring*
Select and view the outdoor unit s system
figure, operation parameters and the operation
parameters of all indoor units.
Note: Only the authorized maintenance personnel can operate on this interface
2.4.2 Unit Selection Software
The unit selection software developed on the basis of unit model allows you to select and verify
units as required by customers, and collect statistics on the model of indoor/outdoor units and
the usage of refnet joints and copper pipes . In this way, the complicated unit design and model
selection can be achieved easily.
Design & installation Guide For McQuay MDS Multi System
Service monitoring*
Display the current operation parameters
and history record curve of indoor/outdoor
unit in the system.
-33-