18
en | Keypad alarm operation commands
10
Keypad alarm operation commands
10.1
Duress alarm
A keypad duress alarm is used as a silent holdup alarm when 0 is added to the end of a valid
Code used to disarm the system ( [code] + [0] + [#] ).
A duress alarm is useful only if your system reports to a monitoring station. Domestic
reporting cannot define the type of alarm that occurred.
10.2
Keypad panic alarm
If you simultaneously press and hold [1] and [3] or simultaneously press and hold [*] and [#],
a silent emergency alarm will be transmitted. Please contact your installer to enable/disable
the keypad emergency alarm functionality.
Simultaneous pressing and holding the wireless remote control key arming and disarming key
can also transmit a wireless emergency alarm.
10.3
Keypad fire alarm
If you simultaneously press and hold [4] and [6], a silent keypad fire alarm will be transmitted.
Please contact your installer to enable/disable the fire alarm functionality.
10.4
Keypad medical alarm
If you simultaneously press and hold [7] and [9], a silent keypad emergency medical alarm will
be transmitted. Please contact your installer to enable/disable the emergency medical alarm
functionality
F.01U.249.500 | V2 | 2011.11
User Guide
Robert Bosch Engineering and Business Solutions Limited
AMAX panel 2000 / AMAX panel 2000 EN