Document Information - Quasar CM-4321 User And Installation Manual

1 Document Information

Document Scope and Purpose
The purpose of this document is to provide instructions and installation procedures for physically
connecting the Quasar CM-4321 camera. After completing the physical installation, additional setup and
configurations can be implemented before video analysis and detection commence.
Note:
This document is intended for use by technical users who have a basic understanding of CCTV
camera/video equipment and LAN/WAN network connections.
Warning:
Installation must follow safety, standards, and electrical codes as well as the laws that apply
where the units are being installed.
Proprietary Rights and Non-Disclosure
This manual is delivered subject to the following restrictions and conditions:

This document contains proprietary information belonging to DVTEL, Inc. This information is
supplied solely for the purpose of assisting explicitly the licensee of the DVTEL units.

No part of this document contents may be used for any other purpose, disclosed to any third
party or reproduced by any means, electronic or mechanical, without the express prior written
permission of DVTEL, Inc.
Trademarks and Copyrights
This manual and its contents herein are owned by DVTEL, Inc. All rights reserved.
DVTEL, the DVTEL logo, and Quasar CM-4321 are trademarks of DVTEL, Inc.
Products and trademarks mentioned herein are for identification purposes only and may be registered
trademarks of their respective companies.
DVTEL, Inc. makes no representations whatsoever about any other products or trademarks mentioned in
the manual.
© DVTEL, Inc. 2014. All rights reserved.
Document Information
vii