Figure 25: Https Screen - Quasar CM-4321 User And Installation Manual

CM-4321 User and Installation Guide
7.3.2.2 HTTPS
To use HTTPS on the camera, an HTTPS certificate must be installed. The HTTPS certificate can be
obtained either by creating and sending a certificate request to a Certificate Authority (CA) or by
creating a self-signed HTTPS certificate as described below.
Note:
The self-signed certificate does not provide the same level of security as a
CA-issued certificate.
HTTPS allows secure connections between the camera and web browser using Secure Socket Layer
(SSL) or Transport Layer Security (TLS) to protect camera settings and username/password info. A self-
signed certificate or a CA-signed certificate is required to implement HTTPS. Under the Security
category, click the HTTPS tab in the sidebar to display the following screen.
To create a self-signed certificate:
Before a CA-issued certificate is obtained, you can first create and install a self-signed certificate.
1. On the HTTPS page, click Create under Create self-signed certificate.
2. Provide the requested information to install a self-signed certificate for the camera. Refer to
Provide the Certificate Information in this section for details.
26

Figure 25: HTTPS Screen