Figure 16: Dna Assign Ip - Static Ip Dialog Box - Quasar CM-4321 User And Installation Manual

8. To access DNA, do one of the following:
a) For DHCP (not supported by Latitude):
i. Select Use DHCP. Do not use for Latitude.
ii. Click Update and wait for status.
b) For Static IP (recommended for Latitude users):
i. Do not select the Use DHCP checkbox. This is recommended for security
purposes and for and Latitude users. In the IP Address, Gateway, and Netmask,
enter the respective LAN/VLAN (optional DNS) values.
ii. Click Update and wait for
9. Right-click and select Browse to directly access the camera via a web browser. The default
web browser opens and requests access to the camera IP address.
10. When the web browser contacts the camera IP, do the following:
a) Login using the default user name Admin and password 1234.
Note:
ID and password are case-sensitive.
Note:
It is strongly advised that administrator's password be altered for security reasons.
Using the DNA Utility to Search and Access the Camera
Figure 16: DNA Assign IP – Static IP Dialog Box
OK status to be displayed.
17