File Location; Figure 54: File Location Screen - Quasar CM-4321 User And Installation Manual

CM-4321 User and Installation Guide
To create a new schedule or edit an existing schedule
1. Click on the appropriate checkboxes relating to the days of the week (Sun, Mon, Tue,
Wed, Thu, Fri and Sat) to create a schedule. Tuesday (Tue) is checked in the example.
2. Set Start time (for example, 09:00) and Duration (for example, 4:00 hours).
3. Click Save to apply the newly created schedule to the camera.
To remove a schedule:
1. Select the setup data line by line and use Delete to remove.

7.3.14 File Location

From the File Location page, specify a storage location for snapshots and web recordings. The default
setting is: C:\. After confirming the setting, click Save to save the snapshots and recordings in the
designated location.
Note:
Make sure the selected file path contains valid characters.
50

Figure 54: File Location Screen