General Specifications - Sartorius IS 150 IGG-H Installation And Operating Instructions Manual

General Specifications

General Specifications
(for Use in Standard Applications Not Subject to Legal Metrology)
(for Use in Standard Applications Not Subject to Legal Metrology)
Model
Readability
Standard deviation
Linearity
Response time (average)
Fastest response time
(constant relative accuracy)
Adaptation to ambient conditions
and application requirements
Data output speed
(depends on the filter level
selected)
Dust and water protection rating
Suitable for use in hazardous
areas
Overload capacity
Net weight (without "isi" terminal)
approx.
Power requirements (optional)
Frequency
Power consumption
(with isi10,20,30 connected to
an A/C adapter, model ING2)
(only weighing platform
connected to an A/C adapter,
model ING2)
Selectable weight units
Automatic zero-tracking function
(can be turned off by menu
code)
Built-in interface
* = Weight unit can also used in legal metrology
* = Weight unit can also used in legal metrology
** = Menu setting "data output speed for converter" is five times faster
** = Menu setting "data output speed for converter" is five times faster
*** = The TÜV is the German Association for Technical Safety and Inspection
*** = The TÜV is the German Association for Technical Safety and Inspection
22
IS 150 IGG-H
g 1
g <± 1
g < ± 4
s < 1.5
s <1
By selection of 1 of 4 optimized filter levels
s 0.1 - 0.1 - 0.2 - 0.4 (normal output speed)**
IP 67, dust-tight and water-proof subject to defined conditions
(certified by TÜV*** in accordance with VDE 0470/EN60529)
kg
kg
via A/C adapter, model ING2, 230 VAC or 115 VAC (to be connected
by your dealer or a Sartorius service technician only)
Hz
VA 34: maximum, 18: average
VA
g*, kg* , ct, oz, ozt, tlh, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat,
RS-485 (standard, XBPI protocol): 8-bit; odd parity;
transmission rates: 9,600...38,400; half-duplex
optional for RS-232 (SBI protocol): 7-bit; parity: even, mark, odd, space;
transmission rates: 150...19,200 baud;
1 or 2 stop bits, software /hardware handshake;
factory setting: 1,200 baud; odd parity; 1 stop bit; hardware handshake
with two characters after "CTS"
IS 300 IGG-H
2
< ± 2
< ± 8
< 1.5
<1
Zone 2 and 11
600
70
48 – 63
10: average
MS, tons
Standard feature
Installation Instructions
General Specifications
21