Bring windshield into de-
sired position by rotating it
forward or back.
The windshield can be
set to six positions.
Make sure that the clamp-
ing screws 1 are adjusted
symmetrically on the left
and right.
Tighten clamping screws.
Clutch
Adjusting clutch lever
If the position of the
clutch fluid reservoir is
changed, air can enter the
clutch system.
Do not reposition the handle-
bar controls on the handle-
bars or the handlebars in their
mounts.
Attempting to adjust the
clutch lever while riding
the motorcycle can lead to
accidents.
Adjust the clutch lever only
when the motorcycle is sta-
tionary.
Turn adjusting screw 1
clockwise.
Distance between handle-
bar grip and clutch lever in-
creases.
Turn adjusting screw 1
counterclockwise.
Distance between handle-
bar grip and clutch lever de-
creases.
Brakes
Adjusting handbrake
lever
Changing the position of
the brake-fluid reservoir
can allow air to penetrate the
brake system.
Do not reposition the handle-
bar controls on the handle-
bars or the handlebars in their
mounts.
Attempting to adjust the
brake lever while riding
the motorcycle can lead to
accidents.
Adjust the brake lever only
when the motorcycle is sta-
tionary.
4
43
z