BMW R 1200 GS Manual page 50

4
48
Insert passenger seat 2 into
rear locking device.
Press down firmly on front
z
region of passenger seat 2.
Passenger seat clicks audi-
bly into place.
Removing driver's seat
Make sure the ground is
level and firm and park the
motorcycle.
Removing passenger seat
( 47)
Turn key 1 in seat lock
counterclockwise while
pressing down on rear
region of driver's seat 3.
Lift rear of driver's seat 3
and remove.
Installing driver's seat
If too much pressure is
applied in the forward
direction, there is a danger
that the motorcycle will be
pushed off its stand.
Make sure that the motorcy-
cle is steady on its stand.
Install driver's seat 1 into
front locking device.
Press down firmly on rear
region of driver's seat 1.
Driver's seat clicks audibly
into place.
Installing passenger seat
( 47)
Adjusting seat
Make sure the ground is
level and firm and park the
motorcycle.
Removing passenger seat
( 47)