BMW R 1200 GS Manual page 107

Insert bulb 3 into socket.
Insert lamp housing 2 into
retaining brackets.
Install screws 1.
Replacing turn indicator
bulbs
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure the ground is
level and firm and park the
motorcycle.
Remove screw 1.
Pull screw connection side
of lens out from mirror
housing.
Remove bulb 2 from light
housing by turning it coun-
terclockwise.
7
105
z