BMW R 1200 GS Manual page 110

Press bottom of air filter in-
7
to air filter housing, making
sure not to bend its layers in
108
the process.
z
Place intake snorkel 2
against air filter housing.
Slide retaining brackets 1
into holder until they audibly
click into place.
Make sure that the throttle
valve cable is seated in the
guide 4 of the intake mani-
fold and the throttle valve is
resting against the stop.
Insert tank cover 6.
Install mounting screws 5.
Press front of side panel 4
into bracket.
Close quick-release fasten-
ers 2.
Orient quick-release fasten-
er 3 horizontally and press
into side panel 4.
The quick-release fastener
clicks audibly into place.