Ddr Sdram Installation - Acorp 7KT400 User Manual

Chapter 1

1.6 DDR SDRAM Installation

The motherboard supports a maximized 3GB memory. It pro-
vides three 184-pin unbuffered DDR sockets and each supports
64MB to 1GB DDR memory module.
DDR SDRAM Installation Procedures:
1. The DDR socket has a "Plastic Safety Tab" and the DDR memory
module has an asymmetrical notch", so the DDR memory mod-
ule can only fit into the slot in one direction.
2. Push the tabs out. Insert the DDR memory modules into the
socket at a 90-degree angle then push down vertically to fit
onto place.
3. The Mounting Holes and plastic tabs should fit over the edge
and hold the DDR memory modules in place.
Note:
When you plug or unplug DDR module, you must check your
power supply is OFF.
184-pin DDR Module
DDR Module Notch
DDR Module Rib
1-11
Motherboard 7KT400