Table of Contents
Advertisement
Chapter 1
1.5 CPU Installation
The motherboard operates with Socket 462 for AMD Athlon
TM
and Duron
processor. The CPU should always have a Heat Sink
and cooling fan attached to prevent overheating.
CPU Installation Procedures for Socket 462
1. Pull the lever sideways away from the socket then raise the
lever to a 90-degree angle.
2. Locate Pin 1 in the socket and look for the white dot or cut edge
in the CPU. Match Pin 1 with the white dot/cut edge then
insert the CPU.
3. Press the lever down to complete the installation.
4. Make sure the spec of the cooling fan is good enough.
5. Please lock the fan on CPU very carefully, or you will damage
the resistor array even circuit line on the mainboard.
BIOS
VIA
KT400
VIA
VT8235
1-10
Motherboard 7KT400
Notch
TM
Hide quick links:
Advertisement
Table of Contents
