Acorp 7KT400 User Manual page 19

Chapter 1
SMI Suspend Switch Lead
This allows the user to manually place the system into the
Suspend Green mode . System activity will be instantly
decreased to save electricity and expand the life of certain
components when the system is not in use. This 2-pin connector
(see the figure) connects to the case-mounted suspend switch.
If you do not have a switch for the connector, you may use the
"Turbo Switch" instead since it does not have a function. If
you want to use this connector, the "Suspend Switch" in the
Power Management Setup of the BIOS SOFTWARE section
should be enabled.
Reset Switch Lead (RST)
The connector can be connected to a reset switch. Press this
reset switch to restart system.
Motherboard 7KT400
1-19