Via Onchip Ide Device - Acorp 7KT400 User Manual

Chapter 2
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
The Choices: Enabled (default); Disabled

VIA OnChip IDE Device

Press Enter on this item to open the Sub-menu as shown below:
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults
OnChip IDE Channel0
This item is to enable / disable the IDE Primary Master/Slave
channel.
The choices: Enabled; Disabled
OnChip IDE Channel1
This item is to enable / disable the IDE Secondary Master/Slave
channel.
The choices: Enabled; Disabled
IDE Prefetch Mode
This item is to enable / disable the IDE Prefetch Mode. If enabled,
data will be prefetched into buffer during data access.
The choices: Enabled; Disabled
VIA OnChip IDE Device
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
2-50
7KT400 BIOS Setup
Item Help
F7:Optimized Defaults