Acorp 7KT400 User Manual page 43

Chapter 2
x DRAM CAS Latency
When DRAM Timing is set Manual, use this item to set the
DRAM CAS Latency tine. .
The Choices: 1.5; 2; 2.5; 3
x Bank Interleave
When DRAM Timing is set Manual, use this item to set the
DRAM Bank Interleave.
The Choices: Disabled; 2 Bank; 4 Bank
x Precharge to Active(Trp)
When DRAM Timing is set Manual, use this item to set the
DRAM Precharge to Active(Trp) cycle.
The Choices: 2T; 3T
x Active to Precharge(Tras)
When DRAM Timing is set Manual, use this item to set the
DRAM Active to Precharge(Tras) cycle.
The Choices: 6T; 5T
x Active to CMD(Trcd)
When DRAM Timing is set Manual, use this item to set the
DRAM Active to CMD(Trcd) cycle.
The Choices: 3T; 2T
DRAM Burst Length
Use this item to set the DRAM Burst cycle Length.
The Choices: 4; 8
DRAM Queue Depth
Use this item to set the DRAM Queue Depth level.
The Choices: 4 level; 3 level; 2 level
DRAM Command Rate
Use this item to set the DRAM Command Rate.
The Choices: 2T Command; 1T command
7KT400 BIOS Setup
2-43