Set Security - UTStarcom F1000 User Manual

Menu

4.3.6 Set Security

Settings Set Security
This option enables you to set the security level to protect your phone
After accessing this option, you will be prompted to enter the security
code. Key in the security code and press the left soft key
correct, the following options will be available (otherwise Code Error will
be displayed)
4.3.6.1 PowerOn Code
If this function is active, the security code will need to be entered each
time you switch on the phone. When this option is highlighted, its current
setting will be displayed in the adjacent bubble
After accessing this option, select ON or OFF to activate or deactivate
4.3.6.2 Change Code
Select this option to change the security code. Observe the following
steps:
1. When New Code is displayed, enter a new security code (0~6 digits
long, using numbers 0~9), and then press the left soft key
Confirm Code will be displayed
2. Enter the new security code again and press the left soft key
to complete the operation
The security code is "888888" by default
If the new security code entered in step 2 is different from that entered
in step 1, when you press the left soft key
be displayed
To avoid any inconvenience, please remember the new security code
46
(Ok), Not Matched will
(Ok). If
(Ok).
(Ok)