Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Studio 1735 Service Manual

Back to Contents Page
Coin-Cell Battery
Dell™ Studio 1735/1737 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Turn the computer over and remove the base cover (see
1 coin-cell battery
3. Use a plastic scribe to push the coin cell battery forward and upward to release it from the slot.
Replacing the Coin-Cell Battery
1. Replace the coin cell battery with the positive (+) side facing upwards.
2. Replace the base cover (see
3. Slide the battery into the bay until it clicks into place.
Back to Contents Page
Begin.
Removing the Base
Replacing the Base Cover).
Cover).