Display Hinges; Removing The Display Hinges; Replacing The Display Hinges - Dell Studio 1735 Service Manual

1. Replace the screw that secures the inverter board.
2. Connect the cables to the connectors on either side of the inverter board.
3. Replace the display bezel (see
4. Follow the instructions in Replacing the Display
Display Hinges

Removing the Display Hinges

1. Follow the instructions in Display
2. Remove the display bezel (see
3. Remove the display panel (see
4. Remove the four screws (two on each side) that secure the hinges to the display cover and remove the hinges.
1 screw (4 total; 2 on each side)

Replacing the Display Hinges

1. Replace the hinges and replace the four screws (two on each side) that secure the hinges to the display cover.
2. Replace the display panel (see
3. Replace the display bezel (see
4. Follow the instructions in Replacing the Display
Back to Contents Page
Replacing the Display Bezel).
Assembly.
Assembly.
Display Bezel).
Removing the Display Panel).
2 hinge (1 left, 1 right)
Replacing the Display Panel).
Replacing the Display Bezel).
Assembly.