Table of Contents
Advertisement
Power Connection
Use the power cord suitable for the power supply in your country. Do not
remove or alter the grounding prong on the power cord. In situations where
a two-slot receptacle is present, have it replaced with a properly grounded
three-prong grounding type receptacle.
AC Power
1.
Connect the supplied AC power cord to the system AC power inlet on the I/O
panel of the system.
2.
Connect the other end of the AC power cord to a corresponding outlet.
DC Power
The product comes with a two pin header that carries 12VDC external power input.
`
1.
Make sure the power distribution to the DC power feed wires is disconnected.
2.
Loosen the screws securing the terminal block to the DC inlet as shown and
remove it from the chassis.
KPC-1530/ 1730 User's Manual
Chapter 3
Getting Started
CAUTION
Label
+
-
27
Function
DC 12V (Optional DC 24V)
GND
Chapter 3
Advertisement
Table of Contents
