Power Connection Turning on the system
1.
Secure the power adapter cable to the DC jack (DC IN) of the HPC-1000
2.
Connect the power cable to the power adapter
3.
Connect the power cable to a power outlet
4.
Press the power switch on the front panel to turn on the system
VESA Mounting
The HPC-1000 comes with VESA FDMI 75 standard mounting holes as shown
below. Use 4 screws with the appropriate length for your VESA mounting bracket.
HPC-1000 User's Manual
Chapter 2
Getting Started
Figure 4 Turning on the system
Figure 5 Mounting hole locations on the HPC-1000
20
Chapter 2