Hdd & Odd Installation; Figure 10 Hdd & Odd Installation - Quanmax KPC-1530 User Manual

HDD & ODD Installation
Step 1
Remove the pre-cut bracket
opening of ODD and the PCI
raiser card holder.
Loosen the 4 screws and take off
the ODD bracket form the system.
Step 2 & 3
Secure the hard drive to the HDD
bracket using the short screws
then secure HDD bracket to the
ODD bracket using the
anti-vibration screws.
Step 4
Secure the ODD to the ODD
bracket using the 4 short screws
provided.
Step 5
Secure the whole bracket to the chassis and connecting the data & power cables.
Above procedure is for KPC-1730 only. If you want to install HDD & ODD in KPC-1530, you
have to secure ODD to the ODD bracket and secure the ODD bracket to the chassis first.
Then secure HDD to the HDD bracket and secure the HDD bracket to the ODD bracket.
KPC-1530/ 1730 User's Manual
Figure 10 HDD & ODD Installation
NOTE
22
Chapter 2