Figure 5 Attach the base to the desktop mounting bracket........19 Figure 6 Attach the base to the desktop mounting bracket........19 Figure 7 Installing the antenna for the optional Wi-Fi card on the KPC-1920... 19 Figure 8 DC power inlet location ................20...
Use extreme caution when installing or removing components. Refer to the installation instructions in this user’s guide for precautions and procedures. If you have any questions, please contact Quanmax Post-Sales Technical Support. WARNING High voltages are present inside the chassis when the unit’s power cord is...
Static electricity can harm system boards. Perform service at an ESD workstation and follow proper ESD procedure to reduce the risk of damage to components. Quanmax strongly encourages you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment.
Remove all items from the box. If any items listed on the purchase order are missing, notify Quanmax customer service immediately. Inspect the product for damage. If there is damage, notify Quanmax customer service immediately. Refer to “Warranty Policy” for the return procedure.
Quanmax or its authorized agent; or if the failure is caused by accident, acts of God, or other causes beyond the control of Quanmax or the manufacturer. Neglect, misuse, and abuse shall include any installation, operation, or maintenance of the product other than in accordance with the user’s guide.
Quanmax. Limitation of Liability In no event shall Quanmax be liable for any defect in hardware, software, loss, or inadequacy of data of any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of the performance or use of any product furnished hereunder.
The greatest threats to a system’s supply of power are power loss, power spikes, and power surges caused by electrical storms, which interrupt system operation and/or damage system components. To protect your system, always properly ground power cables and one of the following devices. KPC-1920 User’s Manual...
Page 12
Surge protectors should be used with all UPS systems, and the UPS system should be Underwriters Laboratories (UL) safety approved. KPC-1920 User’s Manual...
POS, gaming, digital signage, and thin client. Checklist Take out the KPC-1920 from the carton box, check if the unit is properly secure in the plastic bag. Check the contents of the carton box: Panel PC AC power adapter (incl.
Page 14
PS/2 Keyboard, Mouse (on panel) Parallel Port (on panel) Power Button Storage The KPC-1920 has a 2.5” Hard Disk and a CompactFlash Type II. Expansion The KPC-1920 has a Mini PCI slot. Power Supply The KPC-1920 is powered by an external 100V-240V AC power adapter (12VDC out).
Chapter 1 Mechanical Layout Front and Side Panel Figure 1 Mechanical Layout - Front and Side I/O Panel Figure 2 Mechanical Layout - I/O Panel KPC-1920 User’s Manual...
The available internal clearance for the mounting screws is 8mm. Figure 4 Mounting hole locations on the KPC-1920 Desktop Mounting The KPC-1920 comes with a desktop mounting bracket. Attach the base to the bracket spine using the single large screw provided and a flathead screwdriver as shown.
Chapter 2 Figure 5 Attach the base to the desktop mounting bracket. Secure the bracket to the VESA mounting holes on back of the KPC-1920 using the 4 M4x0.7 screws provided and a Phillips screwdriver as shown. Figure 6 Attach the base to the desktop mounting bracket.
Connect the supplied the AC/DC adapter to the system by inserting the DC connector of the adapter into DC power inlet on the I/O panel of the system as shown. Secure the connector by tightening the knurled screw on the DC connector. Figure 8 DC power inlet location KPC-1920 User’s Manual...
You can download the drivers for the product from the Quanmax website at www.quanmax.com and install as instructed there. For other operating systems, please contact Quanmax.
Chapter 4 Chapter 4 Maintenance and Prevention Your KPC-1920 system requires minimal maintenance and care to keep it operating correctly. Occasionally wipe the system with a soft dry cloth. You should only remove persistent dirt by use of a soft, slightly damp cloth (use only a mild detergent).