Chapter 2 Assembly/Disassembly; Accessing Internal Components; Figure 5 Removing The Rear Cover - Quanmax KPC-1530 User Manual

Assembly/Disassembly

Accessing Internal Components

Before opening your system, make sure to turn it off and disconnect the power sources to
prevent electric shock or system damage. And wait 3 to 5 minutes to let the computer cool
before removing the computer cover.
Follow the procedure described below to access the system's internal components.
1) Place the system front-side-down on a soft material to prevent marking or
scratching of the front panel. Remove the screws securing the rear panel of the
chassis as shown.
2) Remove the rear cover. Note the locations of the internal components of the
system.
KPC-1530/ 1730 User's Manual
Chapter 2
WARNING

Figure 5 Removing the rear cover

18
Chapter 2