Chapter 3 AMI BIOS Setup ....................27 Overview ........................27 Main Menu ......................28 Ad vanced Menu ....................29 Security Menu .......................44 Boot Menu......................45 Save & Exit Menu ....................46 Chapter 4 Driver Installation ....................47 KPC-1900 Series Use r’s Manual...
Figure 5 RJ45 connector ..................21 Figure 6 COM port....................22 Figure 7 Turning on the system ................23 Figure 8 VESA Mounting Hole Locations ............24 Figure 9 Panel Mount Cut-out hole and maximum panel thickness....25 Figure 10 Panel Mounting ..................26 KPC-1900 Series Use r’s Manual...
Tables Tables Table 1 KPC-1900 Series product specifications ..........15 Table 2 KPC-1900 Series BIOS Main Menu .............28 Table 3 Advanced Menu ..................29 Table 4 Advanced Menu – Display Configuration..........30 Table 5 Advanced Menu – Super IO Configuration..........31 Table 6 Advanced Menu – Super IO Configuration – Serial Port 1 Configuration ....................31...
Turn off system power, turn off the power supply, and then disconnect the power cord from its source before removing the chassis cover. Turning off the system power switch does not remove power to components. KPC-1900 Series Use r’s Manual...
ESD procedure to reduce the risk of damage to components. We strongly encourage you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment. You can also take the following steps to prevent damage from electrostatic KPC-1900 Series Use r’s Manual...
Page 7
Just before unwrapping the antistatic packaging, be sure you are at an ESD workstation or grounded. This will discharge any static electricity that may have built up in your body. KPC-1900 Series Use r’s Manual...
Page 8
Handle components and boards with care. Don’t touch the components or contacts on a board. Hold a board by its edges or by its metal mounting bracket. Do not handle or store system boards near strong electrostatic, electromagnetic, magnetic, or radioactive fields. KPC-1900 Series Use r’s Manual...
(domestic environment) is likely to cause harmful interference, in which case the user will be required to correct the interference (take adequate measures) at their own expense. Changes or modifications not expressly approved by us could void the user' s authority to operate the equipment. KPC-1900 Series Use r’s Manual...
Refer to the “Specifications” section of this user’s guide for the operating and storage humidity specifications. Altitude Operating a system at a high altitude (low pressure) reduces the efficiency of the cooling fans to cool the system. This can cause electrical problems related KPC-1900 Series Use r’s Manual...
Page 11
Surge protectors should be used with all UPS systems, and the UPS system should be Underwriters KPC-1900 Series Use r’s Manual...
Page 12
Preface Laboratories (UL) safety approved. KPC-1900 Series Use r’s Manual...
Introduction Overview Powered by 6th Generation Intel® Skylake S-Series Processors, KPC-1900 Series Panel PC has greatly improved graphics performance, power efficiency and wireless connectivity. In addition to 1x DVI-D, 2 x DP, 4 x USB3.0, 2x USB2.0, 6 x COM, and 2x...
Connector: Phoenix Connector (on rear) or Lockable DC Jack (on rear) Input Voltage: DC 12V (default), DC 24V or other options (by request) Power Adapter: AC to DC, 100V ~ 240V Firmware BIOS: AMI uEFI BIOS w/ 128Mb SPI Flash KPC-1900 Series Use r’s Manual...
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. Power Input The supplied power adapter converts AC power to DC for use with this phoenix connector or DC jack. Power supplied through this connector supplies power to KPC-1900 Series Use r’s Manual...
Page 17
MIC-IN (Pink) The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings. Line-IN (Blue) The Line-in jack is designed to take input from a higher-powered sound source. KPC-1900 Series Use r’s Manual...
Getting Started Setting up your PC Connecting the monitor Connect the DP / DVI- D cable from your display to the DP / DVI- D port. DVI-D DVI-D Figure 3 DP / DVI-D KPC-1900 Series Use r’s Manual...
Chapter 2 Connecting USB mouse & keyboard Your KPC-1900 Series does not come with a keyboard and mouse, but you can use any USB keyboard or mouse with your computer. Figure 4 Connect USB mouse & keyboard NOTE Using a third-party USB mouse or keyboard may require software drivers.
Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch. Figure 5 RJ45 connector KPC-1900 Series Use r’s Manual...
3. Connect the other end of the AC power cable to a corresponding AC power outlet. 4. Press the power switch on the I/O panel to turn on the system. Power Switch DC In (Phoenix Connector) Power Switch DC In (DC Jack) Figure 7 Turning on the system KPC-1900 Series Use r’s Manual...
Use 4 screws with the appropriate length for your mounting bracket. Figure 8 VESA Mounting Hole Locations NOTE To fasten the metal shelf, your monitor must comply with VESA75 or VESA100 standard. The VESA mounting kit is optional. KPC-1900 Series Use r’s Manual...
The Panel PC can be panel mounted and comes with brackets and screws f or this purpose. The required cutout f or panel mounting and maximum panel thickness is shown below. Figure 9 Panel Mount Cut-out hole and maximum panel thickness KPC-1900 Series Use r’s Manual...
Insert a Panel Mount Secure brackets to Panel Opening Covers from the Bracket into each by tightening the screws chassis with Phillips Bracket Opening Screwdriver (3 on top edge, 3 on bottom edge) Figure 10 Panel Mounting KPC-1900 Series Use r’s Manual...
It is possible for the CMOS battery to fail, which will cause data loss in the CMOS only. If this happens you will need to reconfigure your BIOS settings. KPC-1900 Series Use r’s Manual...
The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens. Table 2 KPC-1900 Series BIOS Main Menu BIOS SETUP UTILITY A d v a n c e d...
> Network Stac k ESC: Exit > H/W Monitor Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. Onboard LAN 1 Controller Options: Disabled, Enabled Onboard LAN 2 Controller Options: Disabled, Enabled Audio Controller Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; Serial Port 1 Type Options: RS232, RS422, RS485 RS485 Duplex Mode Options: Half Duplex, Full Duplex RS485 Auto Flow Control Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 Serial Port 2 Type Options: RS232, RS422, RS485 RS485 Duplex Mode Options: Half Duplex, Full Duplex RS485 Auto Flow Control Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
IO=2E0h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 Serial Port 3 Type Options: RS232, RS422, RS485 RS485 Duplex Mode Options: Half Duplex, Full Duplex RS485 Auto Flow Control Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. SATA Controller(s) Options: Enabled, Disabled SATA Mode Selection Options: AHCI, R AID Serial STS Port 1/2/3/4 Port 1/2/3/4 Options: Disabled, Enabled mSATA Port 1/2 Port 1/2 Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
USB Mass Storage Driver Support [Enabled] ESC: Exit Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. Legacy USB Support Options: Enabled, Disabled XHCI hand-off Options: Enabled, Disabled USB Mass Storage Driver Support Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
F1: General H elp F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. Intel AMT Options: Disabled, Enabled Un-Configure ME Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
F4: Save & Reset ESC: Exit Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. Network Stack Options: Disabled, Enabled Ipv4 PXE Support Options: Disabled, Enabled Ipv6 PXE Support Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
F4: Save & Reset +VRTC : +3.216 V ESC: Exit +1.05V : +1.080 V Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. CPU Warning Temperature Options: Disabled, 80 C, 85 C, 90 C, 95 C KPC-1900 Series Use r’s Manual...
Options: Disabled, Enabled Resume By PCI-E Device Options: Disabled, Enabled Resume By Ring De vice Options: Disabled, Enabled Resume By RTC Alarm Options: Disabled, Enabled Watchdog Timer Configuration [Disabled] WDT Function ■ Options: Disabled, Enabled KPC-1900 Series Use r’s Manual...
+/-: Change Opt. Admi nistrator Pass word F1: General H elp User Pass word F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. KPC-1900 Series Use r’s Manual...
Version 2.17.1254. C opyright (C) 2016, American M egatrends, Inc. Full Screen LOGO Display Options: Disabled, Enabled Bootup NumLock State Options: On, Off CSM Support Options: Enabled, Disabled Boot Option Filter Options: UEFI and Legacy, Legacy only, UEFI only KPC-1900 Series Use r’s Manual...
Load Optimal Default values for all the setup values. This option allows you to load failsafe default values for each of the parameters on the Setup menus, which will provide the most stable performance settings. The F8 key can be used for this operation. KPC-1900 Series Use r’s Manual...