Av2 Select Setting - JVC HR-S9400E Instructions Manual

To Select The External Input Mode
To record external audio and video signals;
1
Press the remote control's NUMBER key "0".
2
Press AV/S SELECT on the front of the recorder to select the appropriate external input mode.
Pressing AV/S SELECT rotates the input mode as follows:
When using rear panel input connectors:
Connector
AV1 IN/OUT
AV/S
SELECT
AV2 IN/DECORDER
S IN, AUDIO IN L and R
When using front panel input connectors:
Connector
VIDEO, AUDIO
L and R
NOTES:
To record input signals from the AV2 IN/DECODER connector, set "AV2 SELECT to "AV2" (see below).
Connections made to the front panel Video and Audio inputs automatically override the rear panel AUDIO/VIDEO input
connection. If you wish to edit with another machine connected to the rear input connector, make sure that there is nothing
connected to the front connectors.
Use the L connector for monaural connection.

AV2 SELECT Setting

1
Press MENU twice to access the Main Menu screen.
Press PUSH JOG %fi to move the highlight bar (pointer) to "MODE SET", then press OK.
2
Press PUSH JOG %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
4
Press PUSH JOG to move the highlight bar (pointer) to your choice:
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
5
Press MENU to return to normal screen.
If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing.
If you're not using a decoder, leave "AV2 SELECT" set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using
a decoder, be sure to set "AV2 SELECT" back to "DECODER".
Mode
(on display panel) (on screen)
AU-1
AU-2
[S]
Mode
(on display panel) (on screen)
F-AU
AUX 1
AUX 2
(S)
F-AUX
35
EN
MODE SET
AUTO TIMER : OFF
O. S. D. : ON
S-VHS : AUTO
EDIT : OFF
AV2 SELECT : AV2
TIME SCAN : ON
AUDIO
[5 ∞ ] = [ ] : AV2/DECODER
[MENU] : EXIT