Edit To Or From Another Video; Recorder - JVC HR-S9400E Instructions Manual

36
EN
Edit To Or
From Another
Video

Recorder

Set the PAL/MESECAM switch to the appropriate position.
pg. 16
RECORD
2
1 2 3
4 5 6
7 8 9
0
4
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART (AV) connector to
the recorder's 21-pin SCART (AV) connector as
illustrated on page 37.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
If you are using another recorder with S-Video and
Audio input/output connectors, you can connect
them to this recorder's S-IN/S-OUT and AUDIO IN/
OUT connectors.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. When using this recorder as the recording
deck, select the appropriate input mode.
The External Input Mode" on page 35.
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
SET EDIT MODE
3
See "Editing Mode Setting" on page 34.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
Be sure to set "EDIT" back to "OFF" when you finish editing.
( pg. 34)
EDITING (cont.)
"To Select
pg. 35).