JVC HR-S9400E Instructions Manual page 8

8
EN
If both auto channel set and auto clock set have been performed successfully:
1
Perform "Video Channel Set" on page 10.
2
Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the
recorder's memory by using the TV PROG button(s).
If station names (ID —
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change
station names, see pages 52 – 53.
3
Perform "S V
HOW IEW
If auto channel set has succeeded but auto clock set has not:
1
Perform "Video Channel Set" on page 10.
2
Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the
recorder's memory by using the TV PROG button(s).
If station names (ID —
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change
station names, see pages 52 – 53.
3
Perform "Clock Set" on page 55, then "S
correctly.
If both auto channel set and auto clock set have failed:
1
Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the
recorder power back on again.
The Country Set display appears on the front display panel and/or on the screen; perform steps 2 and 4 on pages 6 – 7
again.
IMPORTANT
Depending on the reception conditions, the station names may not be stored correctly, and auto Guide Program Number Set may
not work properly. If the Guide Program numbers are not set properly, S
correctly; be sure to check if the Guide Program numbers have been set correctly (
Since your video recorder memorizes all detected stations even if the reception condition is poor, some of those stored stations
may produce a noisy picture. To delete those stations,
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made
in step 2 on page 6 (unless you have selected BELGIUM or SUISSE), as shown below.
SUOMI [ SUOMI
PORTUGAL [ ENGLISH
DEUTSCHLAND [ DEUTSCH
NORGE [ NORSK
If you want to change the language setting manually,
Just Clock
Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at
regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to "ON".
"Just Clock" on page 55.
pg. 54) have also been stored in the recorder's memory, the station name will be displayed at the
Setup" on page 12 to check if the Guide Program numbers have been set correctly.
pg. 54) have also been stored in the recorder's memory, the station name will be displayed at the
V
HOW IEW
SVERIGE
DANMARK
ÖSTERREICH
ITALIA
Setup" on page 12 to check if the Guide Program numbers have been set
V
HOW IEW
"Delete A Channel" on page 52.
[ SVENSKA
[ DANSK
[ DEUTSCH
[ ITALIANO
"Language" on page 9.
INITIAL SETTINGS (cont.)
timer recording ( pg. 28) will not work
pg. 12, "S V Setup").
HOW IEW
ESPAÑA [ CASTELLANO
NEDERLAND [ NEDERLANDS
GREECE [ ENGLISH
OTHERS [ ENGLISH