Av2 Select Setting - JVC HR-DVS1EK Instructions Manual

48
AV1 SELECT Setting
Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of
this recorder.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV1 SELECT".
3
#
4
Press OK or to select "VIDEO" or "S-VIDEO".
a–VIDEO : If a connected device's output is compatible only with regular video
signals, set "AV1 SELECT" to "VIDEO".
b–S-VIDEO : If a connected device's output is compatible with Y/C signals, set "AV1
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
5
Press MENU to return to normal screen.
The "AV1 SELECT" setting is for signal input to the AV1 IN/OUT connector.
If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".

AV2 SELECT Setting

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER
connector of this recorder.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
#
4
Press OK or to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite receiver connected to
the AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
c–SAT : To view a satellite programme with the TV set while the recorder is in Timer
mode, in Stop mode, recording or turned off. (
5
Press MENU to return to normal screen.
If you have a satellite receiver or a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back
to appropriate mode after editing.
If you're not connecting a satellite receiver or a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to
"AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed
from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a satellite
receiver or a decoder, be sure to set "AV2 SELECT" back to appropriate mode.
If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT" to "DECODER".
S-VHS/AUDIO OUT Setting
Set "S-VHS/AUDIO OUT" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "S-VHS/AUDIO OUT".
3
#
4
Press OK or to select "AUTO", "VHS" or "DV".
a–AUTO : The recorder outputs the signals from the deck being used automatically.
The on-screen display is also output.
b–VHS : The recorder outputs only the signals from the VHS deck. The on-screen
display is not output.
c–DV : The recorder outputs only the signals from the DV deck. The on-screen dis-
play is not output.
5
Press MENU to return to normal screen.
If you select "VHS" or "DV", the Main Menu screen will not appear even when MENU is pressed. To change the menu settings,
connect your TV to the recorder's AV1 IN/OUT connector, not to the S OUT/AUDIO OUT connectors.
ADVANCED OPERATIONS (cont.)
#
.
#
.
pg. 57)
#
.
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT
MODE SET
S-VHS/AUDIO OUT AUTO
O. S. D. ON
AUTO TIMER OFF
DIRECT REC ON
POWER SAVE OFF
AV1 SELECT VIDEO
AV2 SELECT AV2
[5∞] =
[MENU] : EXIT