Playback; Basic Playback - JVC HR-S9400E Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S9400E:
Table of Contents

Advertisement

14
EN
Basic

Playback

Turn on the TV and select the VIDEO channel (or AV mode).
Set the PAL/MESECAM switch to the appropriate position.
pg. 16
REW
2
1
2
3
4
5
6
9
7
8
0
4
FF
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
pressure when inserting.
The recorder power comes on automatically and the
counter is reset to 0:00:00.
If the record safety tab has been removed, playback
begins automatically.
FIND PROGRAMME START
POINT
2
If the tape is advanced past the start point, press REW or
turn the TIME SCAN SHUTTLE ring to the left.
8
To go forward, press FF or turn the TIME SCAN
SHUTTLE ring to the right.
START PLAYBACK
3
Press PLAY.
STOP PLAYBACK
4
Press STOP on the remote or STOP/EJECT on the
recorder's front panel. Then press STOP/EJECT to
remove the cassette.
Usable cassettes
Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
This video recorder can record on regular VHS and
Super VHS cassettes. While only VHS signals can be
recorded on regular VHS cassettes, both VHS and Super
VHS signals can be recorded and played back using
Super VHS cassettes.
PLAYBACK

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s9400ehHr-s9400eeHr-s9400ekHr-s9400uHr-s9400u(c)

Table of Contents